Adjustment of activation pressure in a wide range of values (8-45 MPa)

Guaranteed activation upon reaching the target pressure

Reinforced inlet nozzle to prevent erosive wear and change in characteristics

Device tightness until activation

Possibility of use together with any inflow control device of our company

Ensuring a full-bore internal diameter when installed in a filter

General Description

Well completion screens with ARP Select ACDs can be optionally equipped with an ARP Inject flush valves which enable well flushing/cleaning operations.

The SDT Injection valves are designed for reservoir stimulation, for flushing (cleaning) of completion equipment (screens) from debris (sand) and other slugging products, as well as for the use in reservoir flooding (injector) systems.

ARP Inject valves are designed to align the injection profile along the horizontal section of the well. During production from the well, ARP Inject valves remain closed and can be activated with circulation and pressure created from surface inside the liner to the annulus.

During the liner run in hole operations, the devices remain closed and sealed.

Features & Benefits

Increase in production rates and recovery

Increasing the amount of produced product from untouched reservoir zones far from production well

Reduces the need and amount of well workover operations

Eliminates the need to drill additional horizontal wells to increase the amount of fluid injected into the target zone

The device works autonomously, without the need for control from the surface

No need to lift the completion assembly due to slugging of the outer surfaces of the completions equipment (liners)

Reducing costs by increasing the overhaul period of operational equipment (less workover operations)

Extended well life and reducing well downtime

Solving the problem of uneven inflow in injector wells

ARP inject burst device